The DragonFlite 95 is a Restricted One Design boat that is meant to compete within a strict set of rules to ensure a true test of a skipper.s ability to tune their boat and race it well.

The DragonFlite 95 is a Restricted One Design boat that is meant to compete within a strict set of rules to ensure a true test of a skipper's ability to tune their boat and race it well. Additionally, this 950mm boat is of high quality for a modest price. The DF95 is sold ready to race which includes transmitter and receiver, just add AA batteries. For those already in the hobby, a boat without transmitter and receiver can be purchased. The DF95 comes with a carbon fiber keel, Mylar sails, and a one piece carbon mast, all cutting edge components. It can be on the water in a few hours and assembled by a person with no experience building boats.

Sanctioned in 1993. The Soling 1 Meter is based on the full-size 27' Olympic Soling. Soling 1 Meter Class Specifications: 39.37" (1 meter) long, 8-5/8" beam, approx. 60" bottom keel to tip of mast. Displacement 10 lbs. min.
Features: Performance; Single rig allowed means lower total cost; One Design for equality of boats; Kit-Based, kits Available from two manufacturers; Wide distribution of local clubs in all AMYA Regions.

The Soling 1 Meter Class was first sanctioned by the AMYA in 1993. With thousands of kits sold, and some 4000 boats registered, you can find a Club sailing the Soling 1 Meter in ALL 8 AMYA Regions, and three Provinces in Canada. Over 70 USA and Canadian Clubs list the Soling 1 Meter as the one or the only boat that they support. Something like 50% of ALL RC sailors own at least one Soling!! For over thirty years since being AMYA-sanctioned, the "Soling" has been a Class that offered top competition at the local, Regional, and USA as well as Canadian National Championship levels.
The Soling 1 Meter is a true One-Design: All aspects related to performance are intended to be restricted to what can be achieved by building a Kit straight from the manufacturer's instructions. (The Soling 1 Meter Class Rules may be downloaded from the links table on this page.)
Performance: Soling 1 Meters point high, sail fast, and resist "submarining" like some other more narrow and lighter boats. On a fresh reach or run, the boat gives her skipper fully controlled, exhilarating performance. The fin keel draws only about 8" of water, so the Soling 1 Meter is easier to carry and transport, and can be launched from a shore without wading, as well as from a dock.
And, the Soling resists snagging in pond weeds - she can almost always be sailed back to shore, instead of having to be rescued by rowboat.
Low total cost: Unlike many RC boats, Soling 1 Meter Class allows one rig, using lower cost flat-paneled polyester sails. The Soling can be sailed in winds from near zero to over 20 MPH, using that single rig. And, in a regatta of less than 5 days' duration, you must use the same rig throughout the regatta. This saves hundreds of dollars for additional rigs and sails required to be bought in order to compete in most other popular designs.
AND, Soling 1 Meters LOOK like a real sailboat (after all they are a model of a real sailboat!!) Soling 1 Meters must be built from a kit available from the original manufacturer- Victor Model Products (out of business as of 2018), AND currently only from one of two Class-approved manufacturers:
3DRC Boats offers unassembled hull kits and almost ready to sail kits that can be finished in about 12 hours by virtually anyone. 3DRC also sells full rig kits, aluminum mast and booms, with or without major brand sails.
Vac-U- Boat offers an unassembled hull kit.

You cannot modify the interior construction of the 3DRC or Vac-U-Boat kits, such as removing structure, or adding carbon fiber or other "exotic" materials.
Made in the USA: All Solings, since the first off the mold, have been made in the USA.
To buy a NEW Soling, contact one or both of our manufacturers:
3RC Boats TM
sales@3drcboats.com
Doug Rieger
1-440-610-9542
http://3drcboats.com
OR
Vac-U-BoatTM
philpace@vac-u-boat.com
Phil Pace
1259 Humphries Rd. Conyers, GA 30012
http://www.vac-u-boat.com/

The US12 class is a beautiful full keel, spoon bow yacht of the old America's Cup 12 meter design. She is 46 inches in length with a 16 pound minimum weight, carries a rig of 714 sq. inches of sail area, with a 55 inch hoist. Her "B" rig is 600 sq. inches.

The US12 class is a beautiful full keel, spoon bow yacht of the old America's Cup 12 meter design. She is 46 inches in length with a 16 pound minimum weight, carries a rig of 714 sq. inches of sail area, with a 55 inch hoist. Her "B" rig is 600 sq. inches. She is a great sailing yacht, goes to weather with neutral helm and will track the length of the pond seeking out the wind, and handles wind of 15 knots well before the need to use the B rig.

New boats are available from Blake Moran, bmoran1961@gmail.com/613-438-9070. He is in Canada where the US 12 is called the Mini 12, the same boat with a slightly different keel setup. Meets AMYA requirements. He offers the hull (in several colors), rigging, kit form or completed boat. Can be shipped to Us. Contact him directly for information Or check for used boats on AMYA classified. ​

The rules and specifications were written to attain a one design class, however, flexibility is allowed in sail material and construction ( single panel vs. multi paneled ), mast and boom materials, deck layouts and fittings, internal electronics components and rigging materials and configuration. https://sites.google.com/site/us12meterclassrc/home