Sanctioned in 1998. The International One Metre is the fastest growing class in the world. The rules in this class are identical to those used throughout the globe. The class has a one-design rig and weight minimums, but the hull design is very much developmental. One meter long, with a sail area as large as a Marblehead. 39.37" long (One meter)

The versatile International One Metre (IOM) is one of the most popular class in the radio sailing world, and many USA sailors enjoy regular travel for competition. Others prefer local sailing, and local fleets are the class backbone. USA's annual Nationals began in 1998. The class formed in the late 1980s, specifying three (3) one-design rigs with the hull/foils controlled by box rule. This format encourages evolution and created our highly refined fleet of today, where creative skippers continue to test new ideas. We race in the lightest breeze up to very strong winds and waves, where we need our smallest rig up to 35-40 knots. The hull weight limit allows amateur designers/builders to carefully create competitive IOMs and test their mettle against the best commercially available. Besides our plethora of purchase options, we have a recent global boom in home-built woody hulls now too. While the most skilled skippers usually win the regatta, no single design dominates our World Championships on even years.

One Design Sanctioned in 1995. Also called "One Design One Meter". The ODOM is based on a U.S. One Meter design. This small-sized yacht's kit must be initially purchased from the manufacturer. Sails are strictly controlled, but may be purchased or made from scratch. This one design class allows no variations. The class is managed by a class association. 39.37" long.

Odom is a One Design Class. See the Class Rules for specifications. Length 39 3/8". Weight 7 1/4 lbs. height bottom of bulb to masthead 75". Comes in 12 hull colors. Minimum construction time. Good entry level boat. Handles strong puffs, choppy water, and points well.

Sanctioned in 1993. The Soling 1 Meter is based on the full-size Olympic Soling. Specifications: 39.37" long, 8-5/8" beam, approx. 60" bottom keel to tip of mast. 10 lbs. min.
Features: Performance; Single rig allowed means lower total cost; One Design for equality of boats; Kit-Based, kits Available from two manufacturers; Wide distribution of local clubs in all AMYA Regions.

The Soling 1 Meter Class was first sanctioned by the AMYA in 1993. With thousands of kits sold, and some 4000 boats registered, you can find a Club sailing the Soling 1 Meter in ALL 8 AMYA Regions, and three Provinces in Canada. Over 70 USA and Canadian Clubs list the Soling 1 Meter as the one or the only boat that they support. Something like 50% of ALL RC sailors own at least one Soling!! For over thirty years since being AMYA-sanctioned, the "Soling" has been a Class that offered top competition at the local, Regional, and USA as well as Canadian National Championship levels.
The Soling 1 Meter is a true One-Design: All aspects related to performance are intended to be restricted to what can be achieved by building a Kit straight from the manufacturer's instructions. (The Soling 1 Meter Class Rules may be downloaded from the links table on this page.)
Performance: Soling 1 Meters point high, sail fast, and resist "submarining" like some other more narrow and lighter boats. On a fresh reach or run, the boat gives her skipper fully controlled, exhilarating performance. The fin keel draws only about 8" of water, so the Soling 1 Meter is easier to carry and transport, and can be launched from a shore without wading, as well as from a dock. And, the Soling resists snagging in pond weeds - she can almost always be sailed back to shore, instead of having to be rescued by rowboat.
Low total cost: Unlike many RC boats, Soling 1 Meter Class allows one rig, using lower cost flat-paneled polyester sails. The Soling can be sailed in winds from near zero to over 20 MPH, using that single rig. And, in a regatta of less than 5 days' duration, you must use the same rig throughout the regatta. This saves hundreds of dollars for additional rigs and sails required to be bought in order to compete in most other popular designs.
Soling 1 Meters must be built from a kit available from the original manufacturer- Victor Model Products (out of business as of 2018), AND currently only from one of two Class-approved manufacturers:
3DRC Boats offers Almost ready to Sail kits that can be finished in about 12 hours by virtually anyone. 3DRC also sells full rig kits, aluminum mast and booms, with or without major brand sails.
Vac-U- Boats offers an unassembled hull kit.

You cannot modify the interior construction of the 3DRC or Vac-U-Boat kits, such as removing structure, or adding carbon fiber or other "exotic" materials.
Made in the USA: All Solings, since the first off the mold, have been made in the USA.
To buy a NEW Soling, contact one or both of our manufacturers:
3RC Boats TM
sales@3drcboats.com
Doug Rieger
1-440-610-9542
http://3drcboats.com
OR
Vac-U-BoatTM
philpace@vac-u-boat.com
Phil Pace
1259 Humphries Rd. Conyers, GA 30012
http://www.vac-u-boat.com/